Temperature and humidity are the two most important factors that influence the efficiency and the productive life of sandpaper. Products that are subjected to frequent climate changes can be permanently affected in their adhesive. Excessive humidity causes softening of adhesive film, resulting in the product getting plugged up or peeling easily. Excessive dryness causes rigidity, reduced flexibility, and results in deformation. Therefore, the following recommendations should be followed:

  • Temperature levels must be maintained between 13 and 21 degrees Celsius, with a relative humidity between 45 and 60%
  • Boxes should be maintained away from walls and floors where they could absorb moisture
  • Store coated abrasives away from any source of heat such as heaters, radiators, vapor pipes, hot air vents, ovens and stoves
  • Keep the products in their original packaging; this will protect them, facilitate use, and can store them in a convenient and practical manner

Maxicut fiber discs are the most aggressive abrasive discs covered in double resin, which are built on top of vulcanized fiber support made for hard work.

Designed for applications such as aggressive material removal and surface mixing.

It’s used with back cushions in portable angular grinders.

Applications: rough stock removal, bevelling of edges, fusion welding, shaving and trimming, rust removal, cleaning and finishing.


cuadro aplicacion discos de fibra

Descargar nuestro catalogo